KILOWATTLAMPS
Home › UV exposure lamps › Amergraph 10265

Amergraph 10265 — UV exposure lamp replacement

Metal-halide (long-arc) lamp for PCB, screen-printing and plate exposure units, 240 mm, iron-doped (Fe). Also listed as Amergraph HID 10700, Amergraph 7.5 KW and 8 more part numbers.

Power7,500 W
DopingIron-doped (Fe)
Overall length (mm)240 (US distributor catalogue)
Doping / spectrumFe (iron-doped)
Rated life (h)600 (US distributor catalogue typical/warranty)

Need a replacement for the Amergraph 10265?

Send the part number, a photo of the old lamp and your exposure unit model. We check length, base, doping and power and quote within 24 hours.

Quote form

Part numbers listed for this lamp

The same lamp — same overall length and spectrum — appears under all of these numbers in published replacement-lamp catalogues. Brand names identify the original part only.

BrandPart number(s)
Amergraph10265 · HID 10700 · 7.5 KW · HID 10265 · 10711
InterlightIN-067X3 · WW-04UK-9
TheimerTRO 4307 · THO 4307
CaprockCD/10700
AmbaAM 3840 X

Equipment this lamp is listed for

Other exposure lamps with the same doping and similar length

Shown for navigation only — a lamp only fits if length, base and doping all match your unit.

Ushio MHL-153LY · 240 mmUshio MHL-33LY · 240 mmTheimer TH 5717 H · 245 mmTheimer TR 4100 O · 246 mmUshio MHL 5027 · 247 mmTheimer TRS 5027 · 247 mmTheimer TR 5067 · 247 mmTheimer TR 8217 · 248 mm

Frequently asked

Which part numbers are listed for the same lamp as the Amergraph 10265?

In published replacement-lamp catalogues the same lamp (same overall length and spectrum) is listed under 11 part numbers: Amergraph 10265, Amergraph HID 10700, Amergraph 7.5 KW, Amergraph HID 10265, Amergraph 10711, Interlight IN-067X3, Interlight WW-04UK-9, Theimer TRO 4307, Caprock CD/10700, Amba AM 3840 X, Theimer THO 4307. Confirm the length, base and doping of the lamp in your unit before ordering.

Can you supply a replacement for the Amergraph 10265?

Yes — send the part number on your old lamp, a photo of its label and ends, and your exposure unit model. We check overall length, base, doping and power against the original before we quote, and quote within 24 hours.

Why does the doping matter?

The metal added to the mercury fill (iron, gallium or none) sets which UV and violet wavelengths the lamp emits. Your dry film, solder mask, screen emulsion or printing plate is sensitised to particular wavelengths, so the replacement should carry the same doping as the original.

Safety: metal-halide exposure lamps contain mercury and emit strong UV. Never run one outside its housing, wear UV-blocking eye protection when servicing, handle with gloves, and return used lamps for mercury recycling.

Specifications and cross-references compiled from published lamp-maker data (Ushio, Alpha-Cure) and a US replacement-lamp distributor's catalogue. Where sources differ the values are shown side by side. Data is given for identification only — verify against your unit's manual. Lamps supplied by Kilowatt Lamps are compatible replacements and are not made by or affiliated with the brands named.

WhatsApp quote