KILOWATTLAMPS
Home › UV exposure lamps › Technigraf UK 936

Technigraf UK 936 — UV exposure lamp replacement

Metal-halide (long-arc) lamp for PCB, screen-printing and plate exposure units, 280 mm, gallium-doped (Ga). Also listed as Theimer TRO 6090 H, Kuehnast JGHM 4041-0 and 7 more part numbers.

Power4,100 W
DopingGallium-doped (Ga)
Overall length (mm)280 (US distributor catalogue); 280mm (Alpha-Cure Theimer THO6090H)
Arc / lighted length (mm)153mm (Alpha-Cure Theimer THO6090H)
Tube diameter (mm)28mm (Alpha-Cure Theimer THO6090H)
Base / connectionRoll seal (Alpha-Cure Theimer THO6090H)
Doping / spectrumGa (gallium-doped)
Rated life (h)600 (US distributor catalogue typical/warranty)

Need a replacement for the Technigraf UK 936?

Send the part number, a photo of the old lamp and your exposure unit model. We check length, base, doping and power and quote within 24 hours.

Quote form

Part numbers listed for this lamp

The same lamp — same overall length and spectrum — appears under all of these numbers in published replacement-lamp catalogues. Brand names identify the original part only.

BrandPart number(s)
TechnigrafUK 936
TheimerTRO 6090 H · THO 6090 H
KuehnastJGHM 4041-0 · JGMHO 4042-0
UV Light Technology120-3
Beltron28182 · 2452
Sack200 276
BaierKB 1539

Other exposure lamps with the same doping and similar length

Shown for navigation only — a lamp only fits if length, base and doping all match your unit.

Ushio MHL-5000/4 · 280 mmTheimer TRHO 5590 · 280 mmTheimer TR 4090 B · 280 mmTheimer TRO 4090 · 280 mmORC AKP 5500 S · 280 mmUshio GL-50201BF · 280 mmTheimer TR 5140 · 281 mmTheimer TR 3250 H · 273 mm

Frequently asked

Which part numbers are listed for the same lamp as the Technigraf UK 936?

In published replacement-lamp catalogues the same lamp (same overall length and spectrum) is listed under 10 part numbers: Technigraf UK 936, Theimer TRO 6090 H, Kuehnast JGHM 4041-0, Kuehnast JGMHO 4042-0, UV Light Technology 120-3, Beltron 28182, Sack 200 276, Baier KB 1539, Beltron 2452, Theimer THO 6090 H. Confirm the length, base and doping of the lamp in your unit before ordering.

Can you supply a replacement for the Technigraf UK 936?

Yes — send the part number on your old lamp, a photo of its label and ends, and your exposure unit model. We check overall length, base, doping and power against the original before we quote, and quote within 24 hours.

Why does the doping matter?

The metal added to the mercury fill (iron, gallium or none) sets which UV and violet wavelengths the lamp emits. Your dry film, solder mask, screen emulsion or printing plate is sensitised to particular wavelengths, so the replacement should carry the same doping as the original.

Safety: metal-halide exposure lamps contain mercury and emit strong UV. Never run one outside its housing, wear UV-blocking eye protection when servicing, handle with gloves, and return used lamps for mercury recycling.

Specifications and cross-references compiled from published lamp-maker data (Ushio, Alpha-Cure) and a US replacement-lamp distributor's catalogue. Where sources differ the values are shown side by side. Data is given for identification only — verify against your unit's manual. Lamps supplied by Kilowatt Lamps are compatible replacements and are not made by or affiliated with the brands named.

WhatsApp quote